12
Now inflate the high pressure sponsons.
IMPORTANT
:
There is an adapter for the filling valves in
the repair kit. Put it onto the double action
pump.
Then insert the adapter into the valve and
with a half turn screw it to it.
The inflating valves have to positions that
you can adjust by pushing and turning the
white pin in the middle.
In one position you can inflate and
disconnect the pump without letting the air
out again.
If you want to deflate, push in the pin and
do a half turn. The valve stays open.
Best is first to inflate the lower sponson on
one side to around 50%, then on the other
side equally. Then change again and fully
inflate them in turns.
Proceed likewise with the upper sponsons.
The ideal pressure is 0.2-0.25 bar (2.9-
3.63psi)
Do not exceed it!
Your boat is now fully assembled and ready for use.
