background image

4                                                              041604A-1 

10.  Never push objects of any kind into this product through cabinet slots as they may touch dangerous 

voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid 
of any kind on the product. 

11.  To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service 

contractor when some service or repair work is required. Opening or removing covers may expose 
you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the 
appliance is subsequently used. 

12.  Unplug this product from the wall outlet and refer servicing to qualified service personnel under the 

following conditions: 

A.  When the power supply cord or plug is damaged or frayed. 
B.  If liquid has been spilled into the product. 
C.  If the product has been exposed to rain or water. 
D.  If the product does not operate normally by following the operating instructions. Adjust only 

those controls that are covered by the operating instructions. Improper adjustments of other 
controls may result in damage and will often require extensive work by a qualified technician 
to restore the product to normal operation. 

E. 

If the product has been dropped or the cabinet has been damaged. 

F. 

If the product exhibits a distinctive change in performance. 

13.  Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a 

remote risk of electric shock from lightning. 

14.  Do not use the telephone to report a gas leak in the vicinity of the leak. 

           

INSTALLATION 

        PRECAUTIONS

 

1. 

Never install telephone wiring during a lightning storm. 

2. 

Never install telephone jacks in wet locations unless the jack is specifically designed for wet 

Содержание Excursion 36288
























































Отзывы: