36882 English I/B ver. 11202A-1
13
11202A-1
OWNER’S MANUAL
# 36882
ver.
11202A-1
Page : 13 ENGLISH VERSION
12:00
PM
7/14
NEW
20
TOTAL
20
TALK
1-555-555-5555
10:00
PM
11/05
0
05
JOHN SMITH
1-555-555-5555
12:00
PM
7/14
20
20
2. Ensure that all connections (line cord
and adaptor cord) are properly inserted
into the rear of the base unit.
LCD INFORMATION
During idle / standby mode, the handset
LCD panel will display information in the
following format:
During active or TALK mode (after
placing
a call), the handset LCD panel will display
the following:
During active or TALK mode (after
receiving
a call), the handset LCD panel
will display the following:
NOTE:
The time and date will be set
automatically when the first Caller ID call
is received. You can also manually set the
time as described in “Setting the Time” of
the “Functions Programming” section of
this manual.
TELEPHONE OPERATION
To Place a Call
Using the Handset
1.
Press the TALK button, the call timer
starts to count.
2.
Wait until you hear a dial tone and then
dial the phone number.
3.
When you have finished your call,
press the TALK button again or place
the handset on the base unit.
OR
1. Dial the phone number.
2. Press the TALK button. The number
displayed will be dialed.
3. When you have finished with your call,
press the TALK button again or place
the handset on the base unit.
NOTE:
Do not use this telephone within
20 ft. of a microwave oven while it is
working, as you may experience
interference. This is a normal occurrence
with 2.4 GHz phones and should not be
interpreted as a defect in the product.
Using the Base Unit
1. Press the SPEAKER button on the base
unit. The Speakerphone LED indicator
will light up.
2. Wait until you hear a dial tone, and
then dial the number you wish to dial.
3. When you are finished talking, press
the SPEAKER button to end the call.
To Receive a Call
Using the Handset
1. When the phone rings, the LCD panel
will show “RING.” If you have Caller
ID, the LCD panel will show the
Caller ID information after the first
ring.
2. With the handset off the base, press
the TALK button. Start your
conversation. The call timer starts to
count.
3. To end your conversation, either press
the TALK button or place the handset
on the base unit. If you place the
handset on the base unit charge cradle,
you activate the automatic standby
feature.
NOTE
: The call timer will start to count
once you press the TALK button.
Time
Month/Date
Total
Calls
Received
New Calls
Number you
are dialing
out
Call Timer
(seconds)
Call Timer
(minutes)
Operation
Mode
Caller
Number
(if
available)
Call Timer
(seconds)
Call Timer
(minutes)
