background image

FCC NOTICE

The FCC requires that you be advised of certain requirements involving the use of this telephone.
1.

This telephone is Hearing Aid Compatible.

2.

On the bottom of this equipment is a label that contains, among other information, a product identifier
in the form US:AAAEQ##TXXXX. You must, upon request, provide this information to your telephone
company. The digits represented by ## in the product identifier indicate the Ringer Equivalency Number
(REN) for this equipment. The REN is useful in determining the number of devices you may connect
to your telephone line and still have all of these devices ring when your telephone number is called.
In most (but not all) areas, the sum of the RENs of all devices connected to one line should not
exceed 5. To be certain of the number of devices you may connect to your line as determined by the
REN, contact your local telephone company.

3.

This equipment complies with 47C FR Part 68 of the FCC rules. On the bottom of this equipment is a
label that contains, among other information, the FCC registration number and Ringer Equivalence
Number (REN) for this equipment. If requested, provide this information to your telephone company.

4.

The REN is useful to determine the quantity of devices you may connect to your telephone line and
still have all of those devices ring when your number is called. In most, but not all areas, the sum of
the RENs of all devices should not exceed five (5.0). To be certain of the number of devices that you
may connect to your line, as determined by the REN, you should call your local telephone company to
determine the maximum REN for your calling area.

5.

Privacy of communications may not be ensured when using this phone.

6.

If your telephone causes harm to the telephone network, the telephone company may discontinue
your service temporarily. If possible, they will notify you in advance. But if advance notice is not
practical, you will be notified as soon as possible. You will be advised of your right to file a complaint
with the FCC.

7.

Your telephone company may make changes to its facilities, equipment, operations or procedures
that could affect the proper operation of your equipment. If they do, you will be given advance notice
so as to give you an opportunity to maintain uninterrupted service.

8.

If you experience trouble with the telephone, please contact VTC Service & Manufacturing Co., Inc. at
(800) 888-8990 or write to: VTC Customer Service, 16988 Gale Ave., City of Industry, CA 91745 for
repair/warranty information.  The telephone company may ask you to disconnect this equipment from
the network until the problem has been corrected or you are sure that the equipment is not
malfunctioning.

9.

This equipment may not be used on coin service provided by the telephone company. Connection to
party line service is subject to state tariffs.(Contact your state public utility commission or corporation
commission for information).

10.

WARNING: 

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user

s authority to operate the equipment.

NOTE:

 This equipment has been tested and found, complies with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in residential installation. This equipment generates, uses and can radiate
radio frequency energy. If not installed and used in accordance with the instruction, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measure:

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver needed.

Consult the dealer of an experienced radio / TV technician for help.

11.

USOC jack type is RJ11C, RJ14C and the compatible jack is Part 68 compliance.

12.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation
of this cordless phone does not disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a qulified installer.

5

Содержание Bell Phones Excursion 35828A

































Отзывы: