5
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach
an unsafe temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the ON/OFF switch on the CONTROL PANEL to OFF.
3. Wait 5 minutes.
4. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or
lint. If they are, use a vacuum to clean the vent areas.
5. With the POWER switch in the OFF position, plug the power cord back into the
outlet.
6. If the problem continues, have your outlet and wiring inspected by a professional.
CARE AND MAINTENANCE
ALWAYS
turn the heater
OFF
and
unplug the power cord from the outlet
before cleaning, changing the light bulb, or moving this stove. Failure to do
so could result in
electric shock, fire, or personal injury
.
NEVER immerse in water
or
spray with water.
Doing so could result in
electric shock, fire, or personal injury.
Cleaning
Metal:
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT
use brass polish or household cleaners as these will damage the metal.
Glass:
Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
NEVER
use abrasive cleansers or any cleaner that could scratch the surface.
Plastic:
Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
NEVER
use abrasive cleansers or any cleaner that could scratch the surface.
Vents:
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Clean the exterior of the stove with a slightly damp cloth or duster.
Maintenance
Risk of electric shock
!
DO NOT OPEN the main panels!
No user-
serviceable parts inside!
Electrical and Moving Parts:
The fan and motors are lubricated at the factory and will not require more oil.
Except for the light bulb, all electrical parts and components are integrated into
the heater and are not serviceable by the consumer.
Storage:
Store heater in a clean dry place when not in use.
