SUPERTOW 1
8
4) Assembly (best with 2 persons)
4.1
Required Tools
•
Heavy Duty Side Cutters or Tin Snips
•
#2 Phillips Screw Driver (screw gun is best)
•
¼” Allen Wrench
•
½” Open-End or Ratchet Wrench
•
Hammer or Mallet
•
Gasoline (ethanol-free or 100LL is preferred)
4.2
Uncrating (
crate screws are marked with paint)
NOTE: Keep crate components intact. Crate may be reused for future shipping
1) Cut Metal Strapping, discard.
2) Remove screws from crate cover, set cover aside.
3) Tap center support brace gently upwards to loosen. Remove and set aside.
4) Remove screws from sides. Begin with
screws holding the 2 remaining support
braces, Set wood aside.
5) Remove screws from ends of crate. Set
wood aside.
6) Cut straps holding handle.
7) Remove protective film from engine and
handle; carefully cut plastic wrap on top of
front tires.
