20
SmartCraft gateways
Installation and Operation Manual
NAVMAN
4-2-2 Customising the engine data
displays
To customise an engine data display, press
, select
SmartCraft
, select the display
to customise, and press
. Press
to
display the options:
Data setup
Select the data item to be displayed in the data
header display area (at the top of the display):
1 Press , , or to select the data item
to change.
2 Select the item by pressing
. this will
display a menu of options for the selected
item (the options available will depend on
your engine, see section 1-1).
Press or to select an option, then press
.
4-2-1 Tank status display
The tank level display shows the levels from the
optional level sensors in one or two tanks per
engine (see section 1-1-1).
Before use, each tank must be set up and calibrated
(see section 4-7-1).
An alarm can be set to sound if the level in a tank
is low (see section 4-7-1). These alarms are in addi-
tion to any SmartCraft engine fault low level alarms
(see section 4-5).
3 Repeat steps 1 and 2 to change more data
items, then press
to return to the
main display.
Gauge setup
Select the data to be displayed in the engine data
display areas (not for Tank status display).
1 Press , , or to select a gauge to
change.
2 Change the gauge:
i
Press
to display a menu of op-
tions for the selected gauge (see right;
the options available will depend on your
engine, see section 1-1).
ii Press or to select an option, then
press
.
3 Repeat steps 1 to 2 to change more gauges,
then press
to return to the main
display.
Gauge type
Select the type of gauges to be displayed (not for
Tank status display):
Analogue
: Dial type displays (see also sec-
tion 4-7: Speed range).
Digital
: Number type displays.
Notes:
1 The factory default has gauges appropriate to
the type of engine.
2 To further customise the three gauge dis-
plays, change
Speed range
,
Speed type
and
Pitot type
(see section 4-7).
