20
Northstar NS3300 Pilot
3-12-1 The alarm window
The alarm window shows a list of the latest active
alarms. The most severe alarms appear at the top
of the list.
Turn the Control Dial to stop the NS3300 Pilot
from beeping.
Select
‘Details
’ to jump directly
to the Active alarms screen.
Select ‘
OK
’ to acknowledge the
displayed alarms.
3-12-2 Active alarms
The Active alarms screen shows a list of the
currently active alarms.
To show the Active alarms screen:
• Select
‘
Details’
from the alarm
window or,
• Select
‘
Active alarms
’ in the
Display menu or,
• Go
to
Menu > Setup > Alarms >
Active alarms
.
Turn the Control Dial to select
an alarm in the list and press
to see the Alarm details.
3-12-3 Alarm history
The NS3300 Pilot keeps a record of alarms. The Alarm history
screen shows a list of up to 18 recorded alarm events.
To show the Alarm history screen:
• Go
to
Menu > Setup > Alarms > Alarm history
.
Turn the Control Dial to select an alarm in the list and
press
to see the Alarm details.
3-12-4 Alarm details
The alarm details window shows extra
detail on an individual alarm.
When keylock is activated, the NS3300 Pilot will
ignore most key presses.
• To turn keylock on:
Press and hold the
key for 2 seconds. A ‘
Keys
locked
’ message will appear and a small lock icon
will appear on the lower right-hand display.
3-13 Keylock
3-14 Simulate mode
If the word ‘
Simulate
’ flashes on the display, then
the unit is in simulate mode.
•
Simulate
mode allows you to become familiar
with the unit off the water.
•
Simulate
mode can be turned on or off:
Menu
> Setup > Simulate menu
.
Warning:
Do not use simulate mode while at sea.
• To turn keylock off:
Press and hold the
key for 2 seconds. A ‘
Keys unlocked
’
message will appear and the keys are re-enabled.
