13
Reference Manual and Installation Manual
1 Take the boat for a trial run to check that all
the instruments work correctly.
2 If the unit is part of a system of the NS3100
series instruments connected by NavBus, set
the backlight group number (see section 4-1):
i Press + several times until the
Backlight Group screen is displayed:
ii Press or to set the backlight group
number.
iii
Press .
3 Set:
The depth units (see section 3-1).
The keel offset (see section 3-5).
Backlight
group 3
Depth units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . m
Keel offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
Depth alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Off
SIMULATE mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Off
Backlight level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
Backlight group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
6-2 Set up
6-3 Resetting to factory defaults
All settings may be reset to the manufacturer’s
default settings (see below).
To reset to factory defaults:
1 Turn the power off.
2 Hold
down + while you turn the power
on and continue to hold the keys down for at
least five seconds.
