NorthStar M157310K.1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 26

15
Electrodes
On a yearly basis the electrodes should be
inspected and any necessary adjustments made.
1. Remove the 4 nuts that attach the burner to the
heating chamber. You do not have to
disconnect the fuel lines or the electric cords.
2. Pull the burner out from underneath the heat
exchanger. Tip the burner away from the
machine so the electrodes are visible.
3. Clean off carbon deposits, which may have
accumulated on the tips of the electrodes.
4. Reset the spacing as shown below.
5. Reinstall burner using the four nuts and tighten
accordingly.
1/16”
1/8”
5/16”
Electrodes