manualshive.com logo in svg

NorthStar Explorer 710 VHF, Руководство по эксплуатации и установке

NorthStar Explorer 710 VHF - мощное и надежное устройство для общения в море. Идеально подходит как для профессионалов, так и для любителей. Для полного понимания функций и возможностей рекомендуется загрузить руководство по эксплуатации и установке бесплатно с {веб-сайта}.

Поделиться
Скачать
background image

2

Northtstar 

Explorer VHF Series: 710US, 710EU

 Operation and Installation Manual

FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a normal installation. This equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that interference will not occur in 
a particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an output on a circuit different from that to which the receiver is 
connected.

 

Consult the dealer or an experienced technician for help.

 

A shielded cable must be used when connecting a peripheral to the serial ports.

IMPORTANT SAFETY INFORMATION

Please read carefully before installation and use.

This is the safety alert symbol. It is used to alert you to potential 
personal injury hazards, Obey all safety messages that follow this symbol to 
avoid possible injury or death.

WARNING indicates a potentially hazardous situation which, if not avoided, 
could result in death or serious injury

CAUTION indicates a potentially hazardous situation which, if not avoided, could 
result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially 
hazardous situation which, if not avoided, may result in property damage.

DISCLAIMER:

 It is the owner’s sole 

responsibility to install and use the instrument 
and transducers in a manner that will not cause 
accidents, personal injury or property damage. 
The user of this product is solely responsible for 
observing safe boating practices.

BRUNSWICK NEW TECHNOLOGIES INC. AND ITS 
SUBSIDIARIES AND AFFILIATES DISCLAIM ALL 
LIABILITY FOR ANY USE OF THIS PRODUCT IN A 
WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR 
THAT MAY VIOLATE THE LAW.

Governing Language: This statement, 
any instruction manuals, user guides and 
other information relating to the product 
(Documentation) may be translated to, or 

has been translated from, another language 
(Translation). In the event of any conflict 
between any Translation of the Documentation, 
the English language version of the 
Documentation will be the official version of the 
Documentation.

This manual represents the Explorer 710 
as at the time of printing. Brunswick New 
Technologies Inc. and its subsidiaries and 
affiliates reserve the right to make changes to 
specifications without notice.

Copyright © 2006 Brunswick New Technologies 
Inc. Northstar™ is a registered trademark of 
Brunswick New Technologies Inc

Содержание Explorer 710 VHF


























































Отзывы:

Нет отзывов

Похожие инструкции для Explorer 710 VHF

Tactic TTX410 Instruction Manual preview
TTX410
Бренд: Tactic Страницы: 16
Jensen JCR-295 User Manual preview
JCR-295
Бренд: Jensen Страницы: 12
Binatone Terrain 200 User Manual preview
Terrain 200
Бренд: Binatone Страницы: 2
Yacht Devices YDVR-03 User Manual preview
YDVR-03
Бренд: Yacht Devices Страницы: 32
EBENCH KH 2288 Operating Instructions Manual preview
KH 2288
Бренд: EBENCH Страницы: 13
LST WMSOU-xx-P01 Specification Sheet preview
WMSOU-xx-P01
Бренд: LST Страницы: 3
GPX KCCD6316DT Instruction Manual preview
KCCD6316DT
Бренд: GPX Страницы: 4
Wenshing RD232-H-RS232-925M Instruction Manual preview
RD232-H-RS232-925M
Бренд: Wenshing Страницы: 18
QFX BT-41 Operating Instructions preview
BT-41
Бренд: QFX Страницы: 2
Kompernass KH 2282 Operating Instructions Manual preview
KH 2282
Бренд: Kompernass Страницы: 20
SOUNDMASTER UR260 Instruction Manual preview
UR260
Бренд: SOUNDMASTER Страницы: 46
Vertex Standard VX-4100 Series Service Manual preview
VX-4100 Series
Бренд: Vertex Standard Страницы: 63
Makita XRM04 Instruction Manual preview
XRM04
Бренд: Makita Страницы: 28
Panasonic LN38GPX Specification Sheet preview
LN38GPX
Бренд: Panasonic Страницы: 3
Panasonic LN350GPH Specification Sheet preview
LN350GPH
Бренд: Panasonic Страницы: 3
Panasonic LN352GPX Specification Sheet preview
LN352GPX
Бренд: Panasonic Страницы: 3
Panasonic LN01401CQ Specification Sheet preview
LN01401CQ
Бренд: Panasonic Страницы: 3
Panasonic AHR5 Specification Sheet preview
AHR5
Бренд: Panasonic Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды