OPEN
5.2 A
SSEMBLING THE
I
NDOOR
C
ABINET
L
ARGE
Note
: It is important to initially, not tighten the screws.
1.
Put one of the two side walls on the floor, see figure 14 below.
Front
Bottom
Top
Figure 14 Put the side wall on the floor
2. Align the edges of the shelves into the holes of the side wall and attach them
to the front side using M6x20 screws, see figure 16 below.
Note:
Do not tighten the screws at this moment.
Note
: Make sure the shelf
’s back side is facing the floor. See figure
15 below.
Document Number:
INS-0038
Revision:
A
Prepared by:
Mikael Lindevall
Date:
2012-04-26
Approved by:
Ulf Krohn
Status:
RELEASED
Page 13
