4
POWER MODULE
GRILLE
ALTERNATE POSITION
IF DEEPER TOE-SPACE
IS REQUIRED.
IMPORTANT: When installing
water line for the Ice Maker, be
sure to install a SHUT-OFF VALVE
at a convenient location between
the Refrigerator and the supply line.
Recommended water pressure is
20 to 120 P.S.I.
Also required is an in-line WATER
FILTER between the Refrigerator
and the supply line to prevent
sediment from blocking water flow
through the Water Solenoid Valve.
NOTE
Self-piercing water valves and
plastic tubing are not approved
for water supply to Ice Maker.
Enclosure must permit Refrigerator to be
removed for Service.
For corner installations, a minimum 1" filler must be used
as shown above. For units with face-mounted handles - filler
must be 3".
1" Min.
Filler
Cabinet Outline
A
LEVELING LEGS –
4" MAX. EXTENSION FROM CABINET
(MAX. ADJUSTMENT 3")
TO TOP
EDGE OF
GRILLE
NOTE:
UNIT MUST BE INSTALLED LEVEL
IN ALL PLANES, ON A FLOOR
THAT IS STRONG ENOUGH TO
SUPPORT A FULLY LOADED
REFRIGERATOR.
REFRIGERATOR HEIGHT – ADJUSTABLE 82
1
⁄
2
" TO 85"
82
1
⁄
2
" Height leaves 2" from floor to bottom of door
85" Height leaves 4
1
⁄
2
" from floor to bottom of door
ROUGH-IN DEPTH = 24"
82
1
⁄
2
"
TO
85"
85"
TO
87
1
⁄
2
"
Locate the refrigerator in the coolest part of the
room, out of direct sunlight and away from heating
ducts or registers.
Do not place the refrigerator next to heat-
producing appliances such as a range, oven or
dishwasher. If this is not possible, a section of
cabinetry or an added layer of insulation between
the two appliances will help the refrigerator
operate more efficiently.