TVIPTZ30XIR
·
Quick Start Guide
5
Figure 1-4
Wall Mount Bracket, Nuts and Flat Washers
2.
Drill 4 screw holes in the wall according to the holes of the mount, and then insert M8
expansion screws (not supplied) into the mounting holes.
Figure 1-5
Drill Mounting Holes
3.
Attach the wall mount to the wall by aligning the 4 screw holes of the mount with expansion
screws on the wall.
4.
Secure the wall mount with 4 hex nuts and washers.
Figure 1-6
Secure the Mount
5.
Install the speed dome to the mount. Please refer to
Section 1.3.4
Installing the Speed Dome
for installation details.
Follow the same instructions described above for the short-arm wall mounting. For outdoor
applications, please adopt the water-proof measures. The short-arm wall mount is not
recommended for outdoor applications.
1.3.3
Setting the DIP Switch
Set the address and baudrate for the speed dome. The default value of DIP switch is shown below:
Address: 0
Содержание TVIPTZ30XIR
Страница 1: ......
