Northern NVR16POE Скачать руководство пользователя страница 4

Страница: 4 / 186

NVR4POE / NVR8POE / NVR16POE Series NVR User Manual

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:

•

Ensure unit is installed in a well-ventilated, dust-free environment.

•

Unit is designed for indoor use only.

•

Keep all liquids away from the device.

•

Ensure environmental conditions meet factory specifications.

•

Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it

may cause damage to the sensitive electronics within the unit.

•

Highly recommended to use the device in conjunction with an UPS if possible.

•

Power down the unit before connecting and disconnecting accessories and peripherals.

Trademarks and Registered Trademarks

•

Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United

States and/or other countries.

•

HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

•

The products contained in this manual are authorized by HDMI Licensing LLC with the use right of the HDMI

technology.

•

VGA is the trademark of IBM.

•

UPnP

is a certification mark of the UPnP

Implementers Corporation.

•

Other names of companies and product contained in this manual may be trademarks or registered trademarks

of their respective owners.

•

Product Key Features

General



Connectable to network cameras, network dome and encoders.



Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,

HIKvision, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that

adopt ONVIF or PSIA protocol.



Connectable to the smart IP cameras.



PAL/NTSC adaptive video inputs.



Each channel supports dual-stream.



Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.



The quality of the input and output record is configurable.

Local Monitoring



Simultaneous HDMI

and VGA outputs.



HDMI

and VGA outputs at up to 1920×1080 resolution.



Multiple screen display in live view is supported, and the display sequence of channels is adjustable.



Live view screen can be switched in group, and manual switch and automatic cycle live view are also

provided, and the interval of automatic cycle can be adjusted.

Содержание NVR16POE



























































































































































































Результаты поиска

Содержание NVR16POE

Отзывы:

Похожие инструкции для NVR16POE

Бренды по названию

Популярные бренды

Northern NVR16POE, Руководство пользователя

Результаты поиска

Содержание NVR16POE

Отзывы:

Похожие инструкции для NVR16POE

Бренды по названию

Популярные бренды