User Manual of Network Camera
107
1.
Enter the Unattended Baggage Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Unattended
Baggage Detection
2.
Check the checkbox of
Enable Unattended Baggage Detection
to enable the
function.
3.
Select the region from the drop-down list for detection settings.
4.
Click the
Draw Area
button to start the region drawing.
5.
Click on the live video to specify the four vertexes of the detection region, and
right click to complete drawing.
6.
Set the time threshold and detection sensitivity for unattended baggage detection.
Threshold:
Range [5s-20s], the threshold for the time of the objects left over in
the region. If you set the value as 10, alarm is triggered after the object is left and
stay in the region for 10s.
Sensitivity:
Range [1-100]. The value of sensitivity defines the similarity degree
of the background image. Usually, when the sensitivity is high, a very small
object left in the region can trigger the alarm.
7.
Repeat the above steps to configure other regions. Up to 4 regions can be set. You
can click the
Clear
button to clear all pre-defined regions.
8.
Click the
Edit
button to set the arming schedule.
9.
Select the linkage methods for unattended baggage detection, including Notify
Surveillance Center, Send Email, Upload to FTP, Trigger Channel and Trigger
Alarm Output.
10.
Click
Save
to save the settings.
Содержание NTH-IP3B
Страница 1: ......
Страница 124: ...User Manual of Network Camera 124 4 To export the log files click Save log to save the log files in your computer ...
Страница 139: ...User Manual of Network Camera 139 Figure A 1 2 Modify Network Parameters ...
Страница 142: ......
