Network Video Recorder
System Setting
User Manual
Issue: V4.6.X(2022-04-24)
151
Step 3
Input the protocol name.
Step 4
Tick main stream and sub stream. The main stream shows image on full screen live video.
The sub stream shows image on split screen. If you just tick main stream and the channel
will not show image on split screen.
Step 5
Choose the type of protocol, the default value is RTSP.
Step 6
Input the port of the IP camera.
Step 7
Input the path, which decided by the manufacturer of cameras.
Step 8
Click
to save the settings.
9.1.2
Encode
Step 1
On the
System Setting
screen, choose
Channel >
Encode
to access the encode interface,
as shown in Figure 9-7.
Figure 9-7
Encode interface
Step 2
Select a channel from drop-down list.
Step 3
Select stream information, encode type, resolution, frame rate, bitrate control and bitrate
from drop-down list.