Northern N3NVR Series Скачать руководство пользователя страница 29

Страница: 29 / 218

Product Structure

Network Video Recorder

User Manual

Issue: V4.6.X(2022-04-24)

⚫

Use Monitoring dedicated hard disks as the storage devices of the NVR with high

stability and competitive price/performance ratios (the quality of hard disks sold on
markets varies greatly with different brands and models).

⚫

Do not open the enclosure of this product unless performed by a professional

person to avoid damage and electric shock.

⚫

We are not liable for any video data loss caused by improper installation,

configuration, operation, and hard disk errors.

⚫

All images in the document are for reference only, please subject to the actual

products.

2.4

About This User Manual

Please note the following points before using this user manual:

⚫

This user manual is intended for persons who operate and use the NVR.

⚫

The information in this user manual applies to the full series NVR, NVR as an

example for description.

⚫

Read this user manual carefully before using the NVR and follow the methods

described in this manual when using the NVR.

⚫

If you have any doubts when using the NVR, contact your product seller.

⚫

As our products are subject to continuous improvement, we reserve the right to

modify product manual, without notice and without incurring any obligation.

2.5

Installation Environment and Precautions

Installation environment

Table 2-4 defines the installation environment of the NVR.

Table 2-4

Installation environment

Item

Description

Electromagnetism

The NVR conforms to national standards of
electromagnetic radiation and does not cause harm to the
human body.

Temperature

–10

C to +45

Humidity

20% to 80%

Atmospheric pressure

86 Kpa to 106 Kpa

Power supply

DC 12V, DC 48V 2A(1 HDD) or AC110/ 220V 4A(2
HDDs or more)

，

please refer to actual products.

Power consumption

<15W (not including the hard disk)

Содержание N3NVR Series



























































































































































































































Результаты поиска

Содержание N3NVR Series

Отзывы:

Бренды по названию

Популярные бренды

Northern N3NVR Series, Руководство пользователя

Результаты поиска

Содержание N3NVR Series

Отзывы:

Бренды по названию

Популярные бренды