Northern IPPTZ30XIR, Быстрое руководство

Страница: 7 / 16

IPPTZ30XIR
·
Quick Start Guide
6
1 Installation
Warning: Do not power the speed dome up until the installation is finished. To ensure the safety of
personnel and equipment, all the installation steps should be done with power supply off.
Before you start:
Check the package contents and make sure that the device in the package is in good condition and
all the assembly parts are included.
When carrying the speed dome, do not directly pull waterproof group cables. Otherwise,
the waterproof or circuit performance may be affected.
1.1 Connecting Cables
The cable interfaces of network speed dome are shown in two following figures. The cables are
distinguished by different colors. Please refer to the labels attached on the cables for identification.
R
E
D
A
C
2
4
V
Y
E
L
L
O
W
/G
R
E
E
N
B
L
A
C
K
A
C
2
4
V
Red AC24V
Black AC24V
Yellow&Green GND
Purple AUDIO-IN
Black GND
Pink AUDIO-OUT
Yellow/Gray ALARM-IN6
Yellow/Red ALARM-IN7
Yellow/Black ALARM-GND
White/Black ALARM-COM1
White/Red ALARM-OUT1
Network
RED AC24V
YELLOW/GREEN
BLACK AC24V
Figure 1-1 Cables of 5-inch and 7-inch IR Network Speed Dome
1.2 Wall Mounting
1.2.1 Installing the Bracket

The speed dome can be installed to a thread interface or non-thread interface bracket. The
non-thread bracket is highly recommended.

When you select a thread bracket, please install the pendent adapter (supplied) between the
bracket and speed dome. Any mismatch problems shall be taken responsibility by the user.