Northern Lights NL673K, Руководство оператора

Страница: 16 / 45

ONL673 11/13
14
SERVICE
50 200 500 1000 2500
POINT
PAGE OPERATION DAILY Hours Hours Hours Hours Hours
ENGINE:
SP1 8 & 12 Check oil level
•
SP2 12 Change engine oil 1) 4)
• •
SP3 12 Change lube oil filters 1) 4)
• •
SP4 13 Check air cleaner 1) 3) 6)
•
SP5 13 Check V-belt tension 1) 3)
•
SP6 13 Check valve clearances
•
FUEL SYSTEM:
SP7 14 Check primary filter (Racor) 2)
•
SP8 14 Change primary filter element (Racor) 2)
•
SP9 14 Change secondary fuel filter 1) 2)
•
SP10 15 Bleed the fuel system 2)
SP11 17 Check injectors 1) 2) 5)
•
SP12 17 Check fuel injection pump
•
COOLING SYSTEM:
SP13 17 Check coolant level
•
SP14 18 Check and flush cooling system
•
SP16 18 Check and clean radiator fins
•
Check radiator filler cap
•
ELECTRICAL SYSTEM:
SP18 19 Check electrolyte level in batteries 1) 3)
•
SP19 19 Check condition of batteries with hydrometer 1) 3)
•
OUT OF SERVICE:
SP20 19 Winterizing or out-of-service 2)
The Servicing Schedule Chart below shows the service schedule required for proper maintenance of your generator
set. More detailed coverage of each Service Point (SP) is listed on the page noted in the ‘page’ column.
DAILY:
SP1 Check oil level in engine
SP5 Check V-belt tension
SP7 Check primary fuel filter
SP13 Check coolant level
SP18 Check electrolyte level in batteries
AFTER FIRST 50 HOURS:
SP2/3 Change engine oil and filter
SP6 Adjust valves
AFTER FIRST 100 HOURS:
SP2/3 Change engine oil and filter
EVERY 200 HOURS:
SP2/3 Change engine oil and filter
SP4 Check air cleaner
SP8 Change primary fuel filter element
SP9 Change secondary fuel filter
SP16 Check radiator filler cap
EVERY 500 HOURS:
SP11 Check injectors
SP14 Check and flush cooling system
SP19 Check state of charge of batteries
EVERY 1000 HOURS:
SP6 Check valve clearances
SP12 Check fuel injection pump
SP16 Check and clean radiator
1) Perform all maintenance once a year even if hour level has not been reached.
2) Whenever necessary.
3) More often if necessary.
4) After first 50 hours and at 100 hours.
5) Clean injection nozzles every 1500 hours.
6) Replace element every 1000 hours.
Servicing Schedule Chart
Updated 7-9-13