7
11. Place
Weight Stack Support(9), Rubber Cushion 10-1/4"(AG)
& two(2)
Rubber Cushions 3/4"thk x
2"(AH)
over holes in the base of the
Rear Upright(2)
and slide both
Guide Rods(26)
into them.
NOTE:
For
improved performance, we recommend you apply a silicone lubricant to the guide rods prior to their installation.
12 . Leaning the
Guide Rods(26)
toward you, slide the fifteen(15)
Weight Stack Plates(38)
onto
Guide
Rods(26)
.
13. Slide the
Weight Stack Selector Rod Assembly(32)
over the
Guide Rods(26)
and onto the
Weight Stack
Plates(38)
.
14. Slide the
Plastic Rod Support(AI)
onto
Guide Rods(26)
and bolt to the
Upper Guide Rod Support(8)
.
Tighten the three (3) bolts holding the
Upper Guide Rod Support(8)
which were previously left loose on Pg 5.
15. Install
Edge Trim 20-1/4"(AQ)
on
Weight Stack Shroud(45)
& two(2)
Edge Trims 36"(AR)
on
Wt. Stack
Front Shrouds R&L(46)
.
16. Bolt
Weight Stack Shroud(45)
and
Wt. Stack Front Shrouds R&L(46)
to
Rear Upright(2)
using bolting
shown. Install
2" Plastic Cap(AC)
where shown.
AG
AH
2
26
38
32
AI
8
X
9
AQ
AR
45
46
R
46
L
AC
N
O
4 PLACES
4 PLACES
