Northern Industrial Tools 998800, Руководство пользователя

Страница: 5 / 28

•
Remove adjusting keys or wrenches before connecting the tool to the power
supply or turning it on. A wrench or key that is left attached to a rotating part of the
tool may result in personal injury.
TOOL USE AND CARE
•
Do not force the tool. Tools do a better and safer job when used in the manner for
which they are designed. Plan your work, and use the correct tool for the job.
•
Never use a tool with a malfunctioning on/off switch. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired by an authorized
service professional before using.
•
Disconnect spark plug from the tool and place the switch in the locked or off
position before servicing, adjusting, installing accessories or attachments or storing.
Such preventative safety measures reduce the risk of starting the power tool
accidentally.
•
Secure your work with clamps or a vise instead of your hands when practical.
This safety precaution allows for proper tool operation using both hands.
•
Use both hands to operate the saw.
•
Always stop the engine and let the wheel come to a complete stop before putting
down or carrying the saw.
•
This saw vibrates during use. Repeated or long-term exposure to vibration may
cause temporary or permanent physical injury, particularly to the hands, arms and
shoulders. Vary your time of operation.
•
Make sure the Cutting Wheel's maximum operating speed is greater than the
maximum motor speed of 9500 RPM .
•
Inspect the abrasive wheel frequently and replace immediately if cracked,
warped or showing other signs of wear.
•
Never use circular saw blades , carbide-tipped blades, rescue blades, wood cutting
blades or toothed blades with this saw.
•
Store idle tools. When tools are not is use, store them in a dry, secure place out
of the reach of children. Inspect the tools for good working condition prior to
storage and before re-use.
•
Use only manufacturer-recommended accessories for your model. Accessories
that may be suitable for one tool may cause injury when used on another tool.
•
Do not store the Cut-off Saw with the Blade installed.
•
Keep all guards in place and in working order.
•
Never leave the tool unattended when running.
DIAGRAM AND PARTS LIST
5