Page of 8
6
OPERATION
1. Position the mixer on a level surface.
NOTE: Before filling the drum, make sure the mixer
contents can be emptied into a wheelbarrow.
2. Secure the T-handle bolt (#5) firmly prior to drum rotation, and grease all moving parts prior to
initial use and as necessary depending upon use schedule.
3. Use an appropriate 3-prong, grounded extension cord to supply power and turn on the mixer.
4. While the drum is rotating, add water, concrete and aggregate.
5. To pour the concrete, elevate the dump handle while the drum is rotating.
CAUTION:
When tilting the drum to pour the mixture, do so in a very slow, smooth
motion. This keeps the mixer balanced and upright.
6.
In the event of overheating and motor shut down
, turn off the mixer and unplug the unit for
15 minutes. After this cooling period, plug in the unit and turn on the mixer.
MAINTENANCE
CAUTION:
Always disconnect power cord before performing any maintenance and
cleaning.
1. Thoroughly clean unit after each use. Remove all concrete from the mixer.
2. Lightly grease all moving parts.
3. Keep the motor cooling fins clean and free of build up.
NOTE: When cleaning the mixer, wipe the ON/OFF switch assembly and motor with a damp
cloth. Do not spray water directly onto this area. Protect the motor and switch assembly from
rain and moisture.
