5
Check the parts againts the above
list and refer to the diagrams.
Should there be any deficiencies or
damage, you should contact
Northern Tool + Equipment.
GETTING TO KNOW YOUR DRILL PRESS
ASSEMBLY
1. Position base on workbench.
2. Remove protective sleeve from column tube and discard. Place
column assembly on base, and align holes in column support with
holes in base.
3. Locate four (4) 5/16” Dia. x 3/4” long bolts among loose parts bag.
4. Install a bolt in each hole through column support and base and
tighten with adjustable wrench.
5.
Loosen set screw in cloumn collar with 3mm HEX “L” wrench and
remove collar and rack from column.
1. Belt Tension Lock Handles
2. Feed Handle
3. Table Crank
4. Chuck Key
5. Chuck
6. Depth Scale
7. Drill “ON-OFF” Switch
8. Depth Scale Lock
9. Spring Cap
10. Head Locks
11. Bevel Scale
12. Support Lock Handle
13. Table Bevel Lock
