Northern Fridge TF86DC, Руководство пользователя

Страница: 10 / 21

TF86DC User Manual
Updated 23 April 2020 Page 10
2. Remove the profile strip which anchors the panel located at the bottom of the door using a screwdriver as a
lever. Remove the profile strip.
3. Pre-drill holes in the new panel to reattach the door latch on the opposite side.
4. Fit in the new panel, letting it slide, and put back the profile strip and door latch.
3.6.2 Reversing the Door Opening
The TF86DC door normally opens towards the right. To change the side, move the hinges and door latch as shown in
Figure 3.6.2.1 “Reversing Door Opening ” . Image of refrigerator shown is generic and not the TF86DC however the
procedure is similar.
1 Remove screws and top flange.
2 Remove screws holding top and bottom door brackets.
3 Replace bottom door bracket to opposite side.
4 Reposition door pin to opposite side of door.
5 Replace door in bracket (bottom first then attached top bracket)
6 Take off the door latch and put it back in the opposite side of door.
Figure 3.6.1.1: Replacing Door Panel
Figure 3.6.2.1: Reversing Door Opening