Northern Diver Divemaster Commercial Скачать руководство пользователя страница 17

Contact Northern Diver    |  +44 (0) 1257  25 44 44  |  [email protected]  |  www.ndiver.com

NDiver Drysuit Manual  |  East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK 

17

WARNING

DO NOT use GLASS objects to plug the neck or wrist seals. Occasionally, 

the internal pressure will blow the plug out of the seal. Glass can shatter, 

causing injury.

Once the suit is inflated, submerge it a section at a time in the bathtub, and inspect 

for leaks. Small bubbles will appear if a leak is present. Alternately, lay the inflated 

suit down outside, and slowly pour warm soapy water over the suspected areas. 

The soap solution will blow small bubbles, or create fine foam over the leak. Once 

the leaks are located, mark the area, rinse and dry the suit thoroughly, and repair 

the leak or book your suit in for a professional repair service at Northern Diver. In 

some cases if your suit is dry we can repair it immediately if you call to see us.

Repairing a Leak

Ensure the drysuit is completely dry. Wear protective gloves, such as latex gloves. 

Mark the puncture on the outside of the drysuit, and use this mark to mark the 

same area on the inside of the drysuit, always make the repair on the inside 

of the suit. Clean the puncture area by rubbing with sandpaper or a stiff brush, 

and remove any loose particles. Apply 3 layers of Suit Seal (supplied in the 

maintenance kit), allowing 15 minutes’ drying time between each application.

Note: Rub the first coat of Suit Seal in thoroughly until it soaks into the material – 

ensure the Suit Seal isn’t just ‘floating’ on the material’s surface, as this will make 

the repair less effective.

Apply 3 layers of Suit Seal to a repairs patch (supplied in the maintenance kit), 

again allowing 15 minutes’ drying time between each application. Place repairs 

patch on the damaged area of the drysuit and use a roller to push out any air 

bubbles and ensure the patch and suit are firmly bonded together.

Allow 3 hours for the Suit Seal to dry, once dry test your suit again to ensure the 

leak has been repaired. 

If you prefer, Northern Diver can provide this service.

With over 25 years’ experience, our repairs and alterations department has your 

drysuit in safe hands. When suits come in for repair they are inspected, tested, worked 

upon and tested again before they return to the customer. 

Custom options are also available on Northern Diver drysuits if you wish to add 

different elements to what you have purchased. We can change neck, wrists, 

socks, and boots to suit your requirements or add pockets, reflective panels and 

Kevlar® reinforcement on high wear areas. 

Visit 

www.ndiver.com/divewear/suit-spare-parts

 for more details.

If you would like your suit repairing please use our online booking service, 

visit our website www.ndiver.com/repairs

Содержание Divemaster Commercial

























Отзывы: