SM64 Rev. 4.00
NTX403 Series Remote Mount UHF-FM Transceiver
Manual
2.3.8
Post-Installation EMI Test
The purpose of this test is to identify any interference that the transceiver may cause
with existing aircraft systems. The transceiver should be tested in accordance with the
Installation Approval Test Procedure (see section 2.6) and the test results documented
on the record sheets.
Upon satisfactory completion of all performance checks, make the required log
entries and complete the necessary Regulatory Agency paperwork before
releasing the aircraft for service.
2.4
Continued Airworthiness
Maintenance of the NTX403 is ‘on condition’ only. Periodic maintenance of this product
is not required.
2.5
Accessories Required But Not Supplied
Installation kit p/n NTX-IKC (crimp) is required to complete the installation. The kit
consists of the following:
Quantity
Description
NAT Part #
1
Field Serviceable BNC Coax Connector
20-51-001
1
1/4 ATR NTX Mounting Tray
NTX-VT1
1
D-min 25 Pin Female Crimp Installation Kit
D25SV-IKC
Consisting of:
Quantity
Description
NAT Part #
1
D-min 25 Socket housing
20-21-025
25
MS Crimp Socket
20-26-901
1
25 pin JVL Hood/Locklever
20-29-250
2.6
Installation Drawings
DRAWING REV.
DESCRIPTION
TYPE
NTX403\403-0
1.00
NTX UHF Radio Connections
Interconnect
NTX403\405-0
1.00
UHF FM Transceiver
Connector Map
NTX403\634-0
1.00
UHF FM Transceiver
Installation Approval Test Procedure
NTX403-000\922-0
1.00
Remote Mount UHF FM Transceiver
Mechanical Installation
Section 2 ends after these Drawings
Apr 19, 2005
Page 2-5
ENG-FORM: 805-0106.DOT
Amendment # 1
Jan 7, 2008
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
