Northern Airborne Technology AMS43, Инструкция по установке и эксплуатации

Страница: 22 / 42

AMS43 Single Channel Audio Controller Manual SM59 Rev. 4.00
Many in-line PTT cordsets use the PHONE LO connection as the ground reference for
the ICS and TX PTT keylines. The PHONE LO connection in the AMS43 is floating,
which will lead to incorrect keying of the intercom and radio systems if this type of
cordset is used.
In-line PTT cordsets can be a very real source for crosstalk, if the MIC wire pair in the
cordset is not shielded. The source of the crosstalk is the high level Phones audio
being coupled on to the MIC HI/LO pair in the in-line PTT cordset, because of the lack
of shielding for this wire pair. Once the mic line is contaminated, the undesired audio
can be sent into the audio system as ‘mic audio’, then processed and distributed to all
other audio controllers via the ICS Tie Line.
2.4 Continued Airworthiness
Maintenance of the AMS43 Single Channel Audio Controller is ‘on condition’ only.
Periodic maintenance of this product is not required.
2.5 Accessories Required But Not Supplied
Installation kit AA90-IKC (Alt. part No. D50S37SL-IKC) is required to complete the
installation. The kit consists of 1 50-Pin D-min Female Crimp Kit (D50SL-IKC) and 1
37-Pin D-min Female Crimp Kit (D37SL-IKC).
D50SL-IKC consists of
Quantity Description NAT Part #
1 D-min 50 Socket Housing 20-21-050
50 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip Set 20-27-004
1 50 Pin Connector Hood 20-29-051
D37SL-IKC consists of
Quantity Description NAT Part #
1 D-min 37 Socket Housing 20-21-037
37 MS Crimp Socket 20-26-901
1* Jack Screw Set 20-27-002
1* Lock Clip Set 20-27-004
1 37 Pin Connector Hood 20-29-038
* Use as required.
Page 2-6 Nov 10, 2003
ENG-FORM: 805-0106.DOT
Amendment #1 Feb 15, 2005
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.