2.2.0 REGULATION OF THE MAIN BURNER...............................................
•
Replace the nozzle unscrewing it from the center and screwing to his place
select that.
•
Regular the influx of the primary air through the special ring of regulation
fixing the distance likes suitable in the chart to figure 2.
2.0 CONTROL OF THE OPERATION................................................................
•
Verify the stability of the appliance on the plan of support.
•
Check that there is a good influx of fresh air.
•
Check that there are no leaks or losses of gas.
•
Put in operation the appliance.
•
Check the stability of the flame of the main burden.
•
Check that non-combusted gases have an appropriate outlet.
2.0 INTERVENTIONS, REPAIRS AND REPLACEMENT (only for the
authorized technicians)......… … … … … … … … … … … … … … … … … … … … .
Even if the appliance is used correctly, some problems may arise for various
reasons. The table that follows mentions some possible problems and some
suggestions to put them right.
CAUTION!!!!
•
Before performing any intervention of maintenance, reparation or simple
cleaning of the appliance it is necessary to close the gas supply gate valve
at the top of the appliance.
•
At the end of every intervention of reparation or maintenance to some
parts of the appliance relate to gas, make sure that there are no leaks or
looses.
