North FL15, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 10

8
10.9 STORAGE TIME IN MEMORY PROGRAM
•
Open the appliance (see chapter 4.1).
•
Push button «M» until the indicate lamp P is
turn on.
•
Push narrow button down. In the display
program shows number 01.
•
Press continuity the button «M» .
In the display program shows tp and the
temperature indicate lamp is turn on.
•
Enter the temperature you prefer (175C)
•
Press the «M» button
•
In the display program shows t1 and the
time indicate lamp is turn on
•
Enter the time cooking cycle you prefer
(05:00min)
•
Press the «M» button continuity until you
hear the signal sound. (the temperature has
been storage in memory)
•
Press » button to start the program.
With same steps you can storage up to 10
programs.
10.10 RUN PROGRAMS
Once you have create and storage programs,
•
Open the appliance.
•
Push button «M» until the indicate lamp P is
turn on.
•
Push narrow button up/down. Until in the
display program showing program number
you prefer.
•
Press » button to start the program
10.11 TEMPERATURE CHECKING
While the appliance is in cooking cycle press the
«M» button on the display will be showed the
temperature of the heating elements for about 4
seconds.
10.12 ENTER IN THE PROGRAMMER
By entering in the programmer you can change
some parameters such as de activate stand-by
function - change temperature stand-by – signal
time sound time shake- FMC.
To enter in the programmer turn on the general
rocket switch.
•
Press continuity the M button and on/off
together until you hear the signal sound.
•
With the narrow button you can changed
which set need to be change
•
choose the setting and press the M button
•
with narrow button set the new value
•
Press continuity the M button to storage the
setting.
To de activate Stand-by function chose 05 set
value 00:00
To de activate FMC function chose 01 set value
00
To de activate Shake function chose 06 set value
00:00
To bring back default setting set value 01.