2.3 REPLACEMENT OF ELECTRICAL ELEMENTS.....................................…
To replace heating element at the top of the oven remove the right-
hand cover of the appliance. Release the wires and remove the heating
element holding screws inside the chamber. For the lower heating element of
the oven remove the bottom cover of the appliance.
To replace switches remove the panel located on the front of the
appliance.
For the heating plates remove the panel of the front side of the
appliance, release the wires in switch 0,1,2,3. Remove the heating plate.
CUT OFF THE POWER SUPPLY BEFORE COVER REMOVAL.
2.4 TRAINING....................................................................................................
The personnel who are to install and connect the appliance must train the
users appropriately so that they can handle the operation and safety
measures of the appliance.
ATTENTION!!!
•
Check that main voltage in your working area is suitable for the settings on
the label and that the appliance is properly earthed.
•
Before any service activity takes place or any parts are replaced on the
appliance, make sure that pains supply is turned off.
THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR
ACCIDENTS AND DAMAGE CAUSED TO PERSONS, ANIMALS OR
PROPERTY DUE TO NONCOMPLIANCE WITH THESE INSTRUCTIONS.
