North Star MONOBLOCK, Руководство по эксплуатации

Страница: 9 / 10

Two slo-blow 3,15A (220-240V), 6,3A (100-120V) fuses are located inside a small drawer in the AC
main inlet. If you suspect that your AC fuses have blown, disconnect the Monoblock from the AC
mains and contact your North Star Design dealer for assistance.
Danger! Potentially dangerous voltages and current capabilities exist within the Monoblock
power amplifier, even when disconnected from AC mains. Do not attempt to open any portion
of the Monoblock cabinet.
There are no user-serviceable parts inside the Monoblock power amplifier. All service of this
product must be referred to a qualified North Star Design dealer or distributor.
TECHNICAL SPECIFICATIONS
OUTPUT POWER CONTINUOUS RMS WATTS
@ 8 OHMS
@ 4 OHMS 100 WATTS
200 WATTS
BANDWIDTH 0.1 Hz to 120 kHz, -3 dB
THD AND NOISE less than 0.1% at rated power
DAMPING FACTOR greater than 100, 20 Hz to 20 kHz, 8 ohms
OVERALL GAIN & SENSITIVITY 26dB
INPUT IMPEDANCE
BALANCED
UNBALANCED
36k
47k
ABSOLUTE PHASE normal
POWER CONSUMPTION 20 watts standby
500 watts maximum
INPUTS
BALANCED
UNBALANCED user selectable on back panel
1 per channel (XLR)
1 per channel (RCA)
OUTPUTS 1 pair binding posts
DIMENSIONS 8.5 in (W) x 21.2 in (D) x 4.7 in (H)
21.5 cm (W) x 54.0 cm (D) x 12 cm (H)
WEIGHT 40 lbs. (18 Kg)
NOTES