13
Operation Instructions
Changing Trench Depth
The Trencher/Edger can cut a 7,6 or 5” deep trench. Simply unbolt the axle assembly and move it to
the next hole pattern, or “flip” the axle assembly to achieve the desired cutting depth.
Changing Blades
-
Follow lockout procedure as outlined in the Maintenance and Storage section of this manual.
- Tilt machine enough to gain access to blade with wrench.
- Turn nut counterclockwise with 1 1/2
” wrench to loosen.
-
When installing blade, make sure carbide tooth contacts ground before any other part of the blade.
CAUTION:
Do not install blade backward.
7” Trench
6” Trench
5” Trench
Tire removed for clarity.
Removal of tire NOT required
to change trench depth.
“Flip” Axle
Ground
Carbide tooth
Blade
Rotation
Blade
Rotation
Nut
Blade guard
