North Star A1573001 Скачать руководство пользователя страница 5

Grounding Instructions 

  5 

 
 

Your product must be grounded. If your product should malfunction or breakdown, grounding provides a path 
of least resistance for electric current to reduce the risk of electrical shock. Your product should be equipped 
with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an 
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. 
 
     

DANGER

 - Improper connection of the equipment - grounding conductor can result in a risk of 

electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet 
is properly grounded. Do not modify the plug on your product - if it will not fit the outlet; have a proper outlet 
installed by a qualified electrician. Do not use any type adapter with this product. 
 

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

 

Your electric pressure washer should have a ground fault circuit interrupter (GFCI) built into the plug of the 
power supply cord. This device provides additional protection from the risk of electric shock. Should 
replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI 
protection.  If your power supply cord does not included a built in (GFCI) ensure the receptacle is protected by 
a (GFCI).

 

 

Extension Cords

 

 

Use only 3-wire extension cords that have 3 prong grounding-type plugs and 3-pole cord connectors that accept 
the plug from the product. Use only extension cords that are intended for outdoor use. These extension cords are 
identified by a marking “Acceptable for use with outdoor appliances; store indoors while not in use.”  Use only 
extension cords having an electrical rating not less than the rating of the product. Do not abuse extension cord 
and do not yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect the 
extension cord from the receptacle before disconnecting the product from the extension cord. 
 

     WARNING

 - To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch 

plug with wet hands.

 

 

SAVE THESE INSTRUCTIONS

Содержание A1573001

























Отзывы: