North Star 163cc, Руководство пользователя, Страница: 13 / 33

Page 13 of 33
8. Check that the engine throttle lever (silver
lever in picture) is at its idle position (fully left
in picture) then attach the Accelerator Cable
position (3) and wire (4).
9. Assemble the Air Filter Element and the Air Filter Cover.
10. Unplug the wiring connector of the Engine Stop Switch (on the red section of the engine housing).
11. Plug the supplied connector of the Engine Stop
Switch into the engine connector (not the switch
connector) from the above step.
12. Remove a bolt from the engine housing, put the ring
terminal of the Engine Stop Switch over the bolt,
replace the bolt and retighten it.
13. Gather the cables and tie them with a cable tie.
③
④