North Star 157595, Руководство пользователя

Страница: 15 / 64

Assembly and Initial Set-Up
15
Step 3. Initial Pump, Engine & High Pressure Hose Preparation
Prepare
Water Pump Verify pump oil level .
Note: The pump is shipped with oil. *Change oil after first 40 hours, then every 3
months or 500 hours
1. Verify oil level:
a. Remove shipping tape and black vent
plug (if present) from oil fill
cap. Verify that oil level is
half way up the sight glass
(or at the indicator line on
the dip stick, if equipped).
2. If oil level is low, fill using
SAE30 non-detergent oil or Cat
Pump Oil Item #22158.
3. Replace oil fill cap.
Prepare
Engine Fill the engine with oil .
Note: The engine is shipped without oil.
Refer to the Engine Manual to locate oil-fill port and for instructions on filling.
Use the oil grade and quantity specified in the Engine Manual.
Prepare High
Psi Hose on
Hose Reel Completely unwrap / unwind the high pressure hose from the hose reel.
Note: New hose will “grow” when charged for the first time and should always be
charged one time before being wrapped on the reel.
Sight Glass
Oil drain
Oil fill cap