20
(3) Any warranted part that is scheduled for replacement as required maintenance in the written instructions supplied is
warranted for the period of time before the first scheduled replacement date for that part. If the part fails before the first
scheduled replacement, the part will be repaired or replaced by Northern Tool and Equipment Co, Inc. according to
subsection (4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period
prior to the first scheduled replacement point for the part.
(4) Repair or replacement of any warranted part under the warranty provisions herein must be performed at a warranty
station at no charge to the owner.
(5) Notwithstanding the provisions herein, warranty services or repairs will be provided at all of our distribution centers that
are franchised to service the subject engines or equipment.
(6) The SORE owner will not be charged for diagnostic labor that is directly associated with diagnosis of a defective,
emission-related warranted part, provided that such diagnostic work is performed at a warranty station.
(7) Northern Tool and Equipment Co, Inc. is liable for damages to other engine or equipment components proximately
caused by a failure under warranty of any warranted part.
(8) Throughout the SORE warranty period stated above, Northern Tool and Equipment Co, Inc. will maintain a supply of
warranted parts sufficient to meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided
without charge to the owner. Such use will not reduce the warranty obligations of Northern Tool and Equipment Co, Inc.
(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-
exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claims. Northern
Tool and Equipment Co, Inc. will not be liable to warrant failures of warranted parts caused by the use of a non-exempted
add-on or modified part.
WARRANTED PARTS:
The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such
warranty coverage if Northern Tool and Equipment Co, Inc. demonstrates that the SORE has been abused, neglected, or
improperly maintained, and that such abuse, neglect, or improper maintenance was the direct cause of the need for repair
or replacement of the part. That notwithstanding, any adjustment of a component that has a factory installed, and
properly operating, adjustment-limiting device is still eligible for warranty coverage. The following emission warranty parts
list are covered (use portions of this list applicable to your SORE:
(1) Fuel
Tank
(2) Fuel
Cap
(3) Fuel
Line
(4)
Fuel Line Fittings
(5) Clamps
(6) Vapor
Hoses
(7) Carbon
Canister
(8)
Canister Mounting Brackets
