18
Operation Instructions
III.) Applying Chemicals
a.)
Spin the quick couple chemical
injector onto the pump outlet hand
tight.
b.)
Submerge the suction strainer in a
chemical solution.
c.)
Adjust the nozzle holder to low
pressure by pushing the adjustable nozzle out. You need to change to
low pressure if you want to spray chemicals onto the cleaning surface.
d.)
Squeeze the spray gun trigger. The chemical injector will draw the
chemical into the water stream.
e.)
Turn the chemical adjustment knob
to increase or decrease the
chemical concentration.
f.)
Apply chemicals evenly to the
cleaning surface. Allow the
chemicals to react with the dirt,
then rinse at high pressure.
g.)
Never use more chemical than is
necessary to clean the surface.
high pressure
low pressure
Chemical Adjustment Knob
ALWAYS
follow the chemical manufacturer’s
recommendations when using chemicals in the chemical
injector.
ALWAYS
understand all safety precautions and first aid
for the chemicals being used.
