North Star 157304, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 18

6
II.) Assembly Instructions
A. 1. To spray chemical, insert the chemical injector into
the quick connect outlet of the pressure washer as
shown.
2. Connect the clear hose to the chemical strainer and
to the inlet of the chemical injector. The chemical
injector can remained installed at all times. Have
hose exit base as shown below.
3. Install the pressure hose onto the chemical injector
as shown, for 157304.
4. Connect the other end of the pressure hose to the
spray gun as shown.
5. Connect the lance extension to the spray gun and
insert the proper nozzle into the lance end.
6. Make sure all plumbing connections are tight.
7. Install four rubber feet onto base with four 1/4” x 3/4”
flange bolts and four flange nuts. Use the same bolts to
install cross members when installing the rubber feet.
F IG 0 2 3 5
1
RUBBER FEET
BRACE
Nozzle
Lance
Extension
Spray
Gun
Chemical
Injector
High Pressure
Hose
Chemical
Strainer
Clear
Hose
Quick Connect
Outlet
157304 only