North Star 157208, Руководство пользователя

Страница: 12 / 50

Assembly and Initial Set-Up
12
Step 2. Assembly
1) Install grip onto handle.
2) Attach small bumper to handle
with 1/4" x 3/4" self-tapper.
3) Insert (1) 3/8” x 2-1/2” bolt
through (1) flat washer and through
one end of lanyard as shown.
Attach 3/8” cotterless pin to other
end of lanyard.
4) Install handle to generator using
3/8" x 2-1/2" bolt, (4) flat washers
and (1) 3/8" nyloc nut until
washers press against tube walls.
5) Repeat steps for other handle.
6) Insert cotterless pin through bottom
hole of arm so handle doesn’t fold
up while in use.
Step 1
Step 3
Step 2