Assembly and Initial Set-Up
13
STEP 3. INITIAL PUMP & ENGINE PREPARATION
Prepare
Water Pump
Verify pump oil level
.
Note: The pump is shipped with oil.
1.
Remove shipping tape and black vent
plug (if present) from oil fill cap.
2.
Verify that oil level is halfway up the
sight glass.
3.
If oil level is low, fill using SAE 30 non-detergent oil or Cat Pump Oil Item # 22158.
Prepare
Engine
Fill the engine with oil
.
Note: The engine is shipped without oil.
Refer to the Engine Manual to locate oil-fill port and for instructions on filling. Use the oil
grade and quantity specified in the Engine manual. Note: Engine is equipped with an Oil
Drain Hose. To account for the volume of the Drain Hose, an additional ounce of oil will
need to be added to the quantity specified in the Engine Manual.
Fig157116_5
DRAIN HOSE
PLUG
OIL CAP
OIL SIGHT GLASS
