ENGLISH
GREAT BRITAIN • CUSTOMER SERVICE
tel. 0845 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
Ver
. 20140617
Decorative LED Figures
Art.no 36-5710
Model XY-300-32-5
36-5713
XY-300-16-2
36-5714
XY-300-32-4
36-5766
XY-300-40-3
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right
for any errors in text or images and any necessary changes
made to technical data. If you have any questions concerning
technical problems please contact our Customer Services.
Safety
If the product is not to be used for an extended period
the batteries should be removed. Batteries left in the product
have the potential to leak and cause damage.
Do not mix battery types or old and new batteries.
Inserting batteries
1. Grip the nylon cord at the arrow and pull the battery box
out of the figure. The battery box is attached to the figure
by a 20 cm long cable.
2. Press the catch down and open the battery box.
3. Insert 4 × AA/LR6 1.5 V batteries (sold separately) in
accordance with the markings in the battery box.
4. Close the battery box again and re-insert the cable and
the battery box back into the figure.
Operating instructions
Care and maintenance
Clean the product using a soft, moist cloth. Use a mild
detergent – never use a solvent or strong, abrasive detergent,
as this may damage the product.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Battery life
Up to 40 hours (when used continuously)
Batteries
4 × AA/LR6 1.5 V (sold separately)
Operation using the power switch
(continuously on or off)
Press the [ ON/OFF ] button to turn the LED lights on or off.
Operation using the timer function
(6 hours on and 18 hours off in
a continuous cycle)
1. First press the [ ON/OFF ] button and then the [ TIMER ]
button. The LEDs will flash once to indicate that the timer
function has been activated.
2. The LEDs will stay switched on for 6 hours and then
switch off for 18 hours before coming on again for 6 hours,
and so on in a cycle. This operating cycle will continue
until the batteries are discharged or until the LEDs are
switched off.
3. If the [ TIMER ] button is pressed whilst the figure is already
in timer mode, the cycle will begin again with a new 6-hour
operation period from that moment.
