2
EN
G
LIS
H
4 Ceiling spotlights Capricorn
Art.no. 36-2504
Model OCL-254
Please read the entire instruction manual before using the product and then save it for future
reference. We reserve the right for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or other queries, please contact our
customer services (see address details on the back).
All light fittings must be installed correctly to prevent the risk of electrocution. The installation
should only be performed by those with knowledge of electrical wiring. If unsure, contact
a qualified electrician. Follow the instructions carefully and keep them for future reference.
Installation
The fitting needs to be earthed (class I).
1.
Warning!
Before commencing installation, isolate the circuit to be used by removing
the fuse or circuit breaker at the consumer distribution unit. Identify the location and
direction of any hidden supply cables or service pipes before drilling fixing holes.
2. If you have a ceiling light outlet (only in Scandinavia), the fitting can be hung directly onto
the ceiling hook. First, connect the supplied plug to the terminal block as shown in fig. 2.
Hang the light fitting on the ceiling hook and fix the fitting to the ceiling by tightening the nut
on the bottom of the ceiling cup.
3. If you do not have a light outlet in the ceiling, or if the fitting is to be mounted in a different
position than directly under the electric light outlet, use the supplied ceiling bracket and
secure it to the ceiling. Connect the power cable to the terminal block as shown in figure 2 & 3.
Note that the earth conductor attached to the enclosed ceiling bracket must be connected
to the primary earth terminal of the terminal block. Hang the light fitting on the ceiling hook
and fix it in place by tightening the nut on the bottom of the ceiling cup.
Note:
If the power cable is considered external, i.e. enters the ceiling cup from the side,
then it must first be secured by the cable stopper before connection to the terminal block
as shown in fig. 3.
4. Insert light bulbs (observing max wattage).
5. You may now switch the electricity back on.
6. Minimum distance from illuminated objects is 0.5 m.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Technical details
Supply voltage
220–240 V AC, 50 Hz
Bulb
GU10 Max 3 × 50 W (halogen)
