3
EN
G
LI
SH
Operating instructions
Note:
• The lamp unit has a built-in battery pack.
Set the [OFF-P-ON] switch to
OFF
and
let the batteries charge for two days before using the lamp post for the first time.
• Set in the
P
position the wall light’s twilight switch will turn on
one
LED for
decorative purposes from dusk to sunrise.
• Set in the
P
position, if the PIR detector is motion activated during the period
from dusk to sunrise (e.g. during the time when the decorative LED is on),
all LEDs will then come on.
OFF
Set the [OFF-P-ON] switch to the
OFF
if you don’t want the light to come on at all.
P
Set the [OFF-P-ON] switch to the
P
position if you want the decorative LED to
come on from dusk to dawn and for all other LEDs to light during motion detection.
ON
Set the [OFF-P-ON] switch to the
ON
position if you want the light to be on
from dusk to dawn.
Note:
In the
ON
position the light will on be on 50% power in
order save battery life.
Care and maintenance
Clean the wall light using a lightly moistened cloth. Only use mild cleaning agents,
never solvents or corrosive chemicals.
Troubleshooting guide
The wall light doesn’t
come on.
• Make sure that the [OFF-P-ON] switch is set to
P
.
• The batteries are flat. Charge the batteries.
The wall light comes
on randomly.
• See the
Assembly
section above.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
LEDs
19 × 0.07 W White
Lumens
10/50/100 lm
Colour temperature
6,500 K
Detection range
5–8 m within a 90º angle
Protection class
IP44
Size
44 × 23 × 19 cm
