North Kiteboarding Evo BAR 08, Руководство пользователя

Страница: 11 / 20

0
north kiteboarding Evo Bar manual
Sliding S Stopper Ball:
The sliding stopper allows you to adjust your chicken loop throw on the fly
while riding. It must only be used when riding far from dangerous objects as it
reduces the kite’s ability to depower. To use the stopper, hold the bar away from
the stopper using one hand at the center of the bar. Using your free hand, slide
the stopper towards or away from you to adjust your chicken loop throw to the
desired length.
NOTE: Remember to place the stopper as far away from you as possible before
returning to the beach! The Evo bar is delivered so a with full throw of depower
kite will gentle and safety fall out of the sky. Moving the stopper ball around
0cm below the cleat will take care of this total safety function.
Micro Loop:
The Micro Loop allows you to ride with fixed power when the wind is steady or
while cruising to give your arms a break. If you are not comfortable riding with
full constant power, or are near dangerous objects, twist the micro hook on the
top of the iron heart until the hooks points towards you. This makes it harder to
accidentally hook in.
To hook into the Micro Loop, pull the bar towards you and twist your wrists. To
unhook, pull the bar slightly towards you, twist your wrists and let the bar slide
away from you. The Micro loop is mounted at an angle making it difficult to acci-
dentally hook in. In an emergency situation, simply pull your quick release.
The new 00 micro loop is easily removed or replaced. Just push the micro loop
up so that the to top parts will poke out of the bar. If this is impossible use a flat
head screwdriver to pull the up. Now you can push the little plastic part out of
the loop of the dynema line. Now you can feed the micro loop through the bar to
take it out. To reassemble follow the steps in reverse order like shown on
the pics below.
4. Evo Bar Features
Barstopper barstopper fixed bar against stopper