IP-POE24M Hardware Installation Manual
- 16 -
of the data
7
Receiving
the
normal
phase of the data
RXD2+
Input
8
Receiving the paraphase
of the data
RXD1-
Input
The direct-through or cross network cable has the function of auto-identification, so the
five classes of direct-through/cross network cables can be used to connect other
Ethernet devices.
3.4 Checking After Installation
Before starting up the switch, perform the following checks after the switch is installed:
If the switch is installed on a cabinet, check whether the installation point
between the cabinet and the switch is strong. If the switch is installed on a
desk, check whether there is enough space for the switch to discharge its
heat and whether the desk is stable.
Check whether the connected power meets the power requirements of the
switch.
Check whether the grounding line is correctly connected.
Check whether the switch is correctly connected to other terminal devices.
