background image

Nortel Inc. software license agreement

5

Nortel WLAN — Access Port (223x) Quick Installation Guide

  

to receive new Nortel WLAN — Wireless Security Switch (2270), or WLAN — Management System soft-
ware. This limited warranty extends only to you the original purchaser of the Product.

Exclusive Remedy

Your sole remedy under the limited warranty described above is, at Nortel ’s sole option and expense, the 
repair or replacement of the non-conforming Product or refund of the purchase price of the non-conforming 
Products. Nortel ’s obligation under this limited warranty is subject to compliance with Nortel ’s then-current 
Return Material Authorization (“RMA”) procedures. All replaced Products will become the property of Nortel 
. Exchange Products not returned to Nortel  will be invoiced at full Product list prices. Replacement Products 
may be new, reconditioned or contain refurbished materials. In connection with any warranty services here-
under, Nortel  may in its sole discretion modify the Product at no cost to you to improve its reliability or 
performance.

Warranty Claim Procedures

Should a Product fail to conform to the limited warranty during the applicable warranty period as described 
above, Nortel  must be notified during the applicable warranty period in order to have any obligation under the 
limited warranty. 

The End Customer or their designated reseller must obtain a Return Material Authorization number (RMA 
number) from Nortel  for the non-conforming Product and the non-conforming Product must be returned to 
Nortel  according to the then-current RMA procedures. The End Customer or their designated reseller is 
responsible to ensure that the shipments are insured, with the transportation charges prepaid and that the RMA 
number is clearly marked on the outside of the package. Nortel  will not accept collect shipments or those 
returned without an RMA number clearly visible on the outside of the package.

Exclusions and Restrictions

Nortel  shall not be responsible for any software, firmware, information or memory data contained in, stored 
on or integrated with any Product returned to Nortel  pursuant to any warranty or repair. 

Upon return of repaired or replaced Products by Nortel , the warranty with respect to such Products will 
continue for the remaining unexpired warranty or sixty (60) days, whichever is longer. Nortel  may provide 
out-of-warranty repair for the Products at its then-prevailing repair rates.

The limited warranty for the Product does not apply if, in the judgment of Nortel , the Product fails due to 
damage from shipment, handling, storage, accident, abuse or misuse, or it has been used or maintained in a 
manner not conforming to Product manual instructions, has been modified in any way, or has had any Serial 
Number removed or defaced. Repair by anyone other than Nortel  or an approved agent will void this 
warranty.

EXCEPT FOR ANY EXPRESS LIMITED WARRANTIES FROM Nortel Networks SET FORTH ABOVE, 
THE PRODUCT IS PROVIDED “AS IS”, AND Nortel Networks AND ITS SUPPLIERS MAKE NO 
WARRANTY, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, WITH RESPECT TO PRODUCT 
OR ANY PART THEREOF, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF 
TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR 
THOSE ARISING FROM COURSE OF PERFORMANCE, DEALING, USAGE OR TRADE. Nortel 
Networks’S SUPPLIERS MAKE NO DIRECT WARRANTY OF ANY KIND TO END CUSTOMER FOR 
THE LICENSED MATERIALS. NEITHER Nortel Networks NOR ANY OF ITS SUPPLIERS WARRANT 
THAT THE LICENSED MATERIALS OR ANY PART THEREOF WILL MEET END CUSTOMER'S 
REQUIREMENTS OR BE UNINTERRUPTED, OR ERROR-FREE, OR THAT ANY ERRORS IN THE 

Содержание WLAN Access Port 223x















































Отзывы: