Nortel SCS, Руководство пользователя

Страница: 37 / 41

Verifying proper configuration of a new system
2007 Nortel Software Communication System v1.0 Page 25
Appendix A: Command line access
When managing your Software Communication System (SCS), you may have to enter commands for tasks that cannot be accessed
through the web-based configuration manager. To enter these commands you will access the system console. The system console can
be accessed using either of the methods below.
Local Console Access
You can log on to the local SCS server be completing the following tasks.
1 Attach a monitor and keyboard to your SCS server.
2 Turn on the server, if it is not already on.
3
When the login appears, log on with the following credentials and press Enter after each entry:
Username: root
Password: use the password you defined during installation
A command line displays.
Remote Console Access
For remote access, you will need to use an SSH client. Putty, a free SSH client, is available at:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html.
1 Download and install Putty.
2 Start-up Putty. In the Host Name field, enter the IP address or host name of your SCS.
3 Confirm that the port is 22 and the SSH protocol is selected, then click Open .
4 The remote console login appears. Log on with the following credentials and press Enter after each entry:
Username: root
Password: use the password you defined during installation
A command line displays.