Nortel P0607273 03, Руководство пользователя, Страница: 13 / 30

MSC FRU replacement process 13
Media Services Card replacement NN40010-315
8 Install the base function tray latch screws. ( Figure 9 )
Figure 9 Install the base function tray screws
9 Insert all connectors in the correct locations on the front of the base function tray.
10 Connect the AC cord from the BCM hardware to the AC power outlet.
The LEDs on the front of the base unit flash upon startup.
Next Step : You are ready to download the software to the MSC. If you operate a BCM 3.x system, go to
G. Uploading the MSC software for BCM 3.x on page 13 . If you operate a BCM 4.0 system, go to H. Loading the
MSC software for BCM 4.0 on page 16 .
G. Uploading the MSC software for BCM 3.x
1 If you disconnected your computer, reconnect it to the serial port on the BCM or reconnect it to the BCM
through the LAN connection. Then enter the VT100 emulation program (serial port) or Telnet or SSH (LAN
connection).
2 After you connect, press <Enter>.
3 When you are prompted for a User ID, enter the administrator user name, and then press <Enter>.
4 When you are prompted for a Domain, enter a domain name if your system uses one, and then press <Enter>.
If your system does not use domains, only then press <Enter>.
5 When you are prompted for a Password, enter the administrator password, and then press <Enter>.
The Main Menu appears.
Go to step 7 .
If you replace the MSC on a BCM 3.5 or later system, type
1
, and press <Enter>.