Nortel Nortel Contivity Extranet Switch 4500, Начало работы

Страница: 40 / 90

Getting Started with the Contivity Extranet Switch 4500
3-6
Serial Interface Configuration
Alternatively, you can use the serial interface configuration menu to access
the Switch via the serial interface of your PC. The serial interface
configuration menu allows you to give the Switch a Management IP
address, Subnet Mask, and Gateway IP Address so that you can use a Web
browser for management.
Prerequisites
The terminal emulator on your PC must use the following
communications parameters:
• 9600 baud
• 8 data bits
• 1 stop bit
• No parity
• No flow control
Note: Use the IP Address Configuration Utility (refer to page 3-3 ) to con-
figure the Switch with its initial IP address.